harmonicbalancer009024.jpg
Beginning: with R to W
....Our harmonic balancer rebuild/repair prices begin at: $130.00***, plus actual return shipping cost, (usually $13.60 ( a 2 / 3 day air service 'Flat Rate Box', through the post office)), (with Life-time guarantee on rubber bond! ) We have rebuilt over 20,000 harmonic balancer s over the past 37 years, and would be pleased to rebuild yours for you!
...(Visa, M/C, Discover, American Express, money order or your personal or business check all are acceptable)
... We rebuild your harmonic balancer core and return to you, usually in two business days. Normally your part will be back to you in 7 or 8 days, using the "Flat Rate Box" shipping service thorugh the post office. < We rebuild a maximum of three Harmonic Balancers per day.>
-------> Please...Only harmonic balancers weighing under 25 pounds! <--------------------
... Life time guarantee (even if you sell your vehicle!): If the rubber fails on your harmonic balancer , I will rebuild it at no charge to you (you pay only the shipping charges). SEE 'guarantee' link below for limitations on life time guarantee.....
... The premium black silicone (high temperature) rubber we use is not affected by even continual heat (up to 400 F.) or engine motor oil. [ You do want to prevent submersion in solvents or gasoline as this type of rubber will absorb solvents.]
..Excessive static electricity, caused by old, hardened, or slipping fan belts, or defective belt idler pulley, can cause rubber bond to fail. Your responsibility is to insure your fan belts are in good condition to keep your warranty in force.
...*** :(some harmonic balancer models require an extra charge, see 'prices and ordering information' box below for more details.)
Harmonic Balancer Rebuilding/ Repair
   at Dale Manufacturing
(Revised 1/2018
page HB_09
("Vibration Dampeners, Dampers, Pulleys")
. A harmonic balancer ready to be bonded with our shop notes on this model.
Dale Manufacturing
3425 Fairhaven Avenue N.E.
Salem, Oregon USA 97301

(503) 364-8685 PST
(David 'Dale' Langsather owner)
e-mail at:
harmonicbalancer009023.jpg
harmonicbalancer009022.jpg
harmonicbalancer009021.jpg
Beginning: with A to C...
Beginning: with D to H...
Beginning: with I to M..
Click on the yellow boxes to see which harmonic balancer models we have rebuilt so far, for Car Company Names Beginning with:
harmonicbalancer009020.jpg
Beginning: with N to P..
harmonicbalancer009019.jpg
harmonicbalancer009018.jpg
Please Note
dalemfg@q.com
harmonicbalancer009017.jpg
Dale Manufacturing
3425 Fairhaven Avenue N.E.
Salem, Oregon USA 97301

(503) 364-8685 PST
(David 'Dale' Langsather owner)
e-mail at:
harmonicbalancer009016.jpg
harmonicbalancer009015.jpg
harmonicbalancer009014.jpg
harmonicbalancer009013.jpg
harmonicbalancer009012.jpg
harmonicbalancer009011.jpg
*** Function of the Harmonic Balancer...
info@hbrepair.com
harmonicbalancer009010.jpg
harmonicbalancer009009.jpg
To make e-mail contact with
Dale Manufacturing: dalemfg@q.com
harmonicbalancer009008.jpg
Click here to see a Chevrolet Test Lab Report
on a harmonic balancer under development...
(For a Chevrolet Corvair Engine about 1964).
harmonicbalancer009007.jpg
Click here for an order form to include with your harmonic balancer order e-mail or to put in your shipping box...
.. We specialize in rebuilding most harmonic balancer types , especially the rare and hard to find models.
.. Since we rebuild your harmonic balancer core and return it, you keep your original part. (which is important to some people and necessary if your engine has a counter weight on the harmonic balancer, since it then is part of the crankshaft balance system and was balanced as part of the crankshaft on your engine).
..I rebuild your harmonic balancer within two/three business days and return to you. {as we only rebuild up to three per day, you might want to check our schedule.}
 
..With over 39 years of harmonic balancer rebuilding experience, your can rest assured that the job will be done right. I offer a 'life time' guarantee that the rubber will not fail on your harmonic balancer, or I correct the problem at no additional cost to you (except shipping). This harmonic balancer guarantee continues even if your sell your car. (the harmonic balancer guarantee is probably limited only by the length of my life!)
..Please follow the links above to get full information, prices, and a listing of harmonic balancer models I have already rebuilt. If yours is not on my list, please call and we can discuss what information I will need to succesfully rebuild your harmonic balancer. (503 364-8685 PST )
harmonicbalancer009006.jpg
harmonicbalancer009005.jpg
harmonicbalancer009004.jpg
harmonicbalancer009003.jpg
harmonicbalancer009002.jpg
...Once the harmonic balancer parts are separated, cleaned, solvent washed, water washed, air dryed, corse sandblasted at high pressure, and chemicaly primed... the parts are re-aligned and fixtured.
... Timing marks must be re-aligned compared to the key way of the crankshaft, and parts are then clamped in place.
 A final check is made of side to side gap to ensure true running of the harmonic balancer ring. I strive to center the harmonic balancer ring to within 0.001" of perfect center.
... The three parts of the
rubber compound are
measured in an electronic
gram scale and fully mixed.
... The mixture is then put in a vacuum chamber and a high vacuum applied to remove trapped air bubbles in the rubber mixture.
...Finally the liquid rubber mixture is poured into the gap and allowed to
cure fully. (Usually overnight)
... Painting is usually two coats of Acrylic Enamel paint: first flat black (which acts as an excellent primer) and then a finish coat of gloss black. ...This painting on a recently sandblasted surface makes for a durable painted surface.
... Then polishing of the oil seal surface with #320 emery cloth completes the job.
... Now to get it ready to ship out today!...
...(Your harmonic balancer rebuilt in two business days and then returned to you! And with a life - time guarantee that the rubber bond will not fail in service.
... We have harmonic balancers in use for thirty years and use only premium quality 400 F. degree modern rubber which can take the heat! {It costs us about $ 370 per gallon, mabye that is why the factory did not use it?}.)
harmonicbalancer009001.jpg
... I make up a special tool which accurately indexes the crankshaft keyway to the timing mark on the harmonic balancer ring. (alignment tool not shown here)
... Thus, the next one I receive need not be together in one piece, in proper alignment before dis-assembly, for me to accurately repair.